Whirlpool wed94hex User Guide

The default cycle settings will be displayed on the LCD screen. 

You may adjust different settings, depending on whether you 

have selected an Auto Cycle, Manual Cycle, or Steam Cycle. 

See the “Cycle Guide” for detailed information.
NOTE: Not all options and settings are available with all cycles. 

Not all cycles are on all models.
Auto Cycles:

You can select a different dryness level, depending on your 

load, by pressing the button for More, Normal, or Less.  

Selecting More, Normal, or Less automatically adjusts the  

dryness level at which the dryer will shut off. Once a dryness 

level is set, it cannot be changed without stopping the cycle.
Automatic cycles give the best drying in the shortest time.  

Drying time varies based on fabric type, load size, and  

dryness setting.
Manual Cycles:

When you select a Manual Cycle, the default time is displayed. 

Use the LCD control buttons to increase or decrease the time 

in 1 minute increments. Press and hold to change the time in 5 

minute increments. 
The default temperature may be changed by pressing the  

Temperature button until the desired dry temperature is  

selected.
Quick Refresh with Steam:

Select the number of garments in the load. The dryer will  

automatically set the drying time and temperature. 

Select the desired cycle for your load. See the “Cycle Guide”  

or the display for more information about each cycle.
If selecting Timed Dry, use LCD control buttons to adjust the 

length of the cycle. 

MY CYCLE

SPECIALTY

          CYCLES

 TIMED

    DRY

QUICK

      DRY

QUICK REFRESH

Select number of Garments

DELICATE

CASUAL

  TOWELS

HEAVY

 DUTY

JEANS

BULKY ITEMS 

          ENHANCED

        TOUCH  UP

Add additional options such as Static Reduce and/or  

EcoBoost by pressing the button for that option.
NOTE: Not all options and settings are available with all cycles.

If all your loads on all Auto Cycles are consistently not as 

dry as you would like, you may change the default  

settings to increase the default dryness level.
Your automatic drying settings can be adjusted to adapt to 

different installations, environmental conditions, or personal 

preference. This change is saved in memory and will affect 

all of your Automatic cycles, not just the current cycle/load. 

1.  Before starting an Auto cycle, press and hold the  

LCD control button for Dryness Level for 6 seconds.  

The LCD will briefly display the regular Dryness  

Level options, then change to show the default  

setting options.

2.  Press the LCD control button for the desired setting. 
3.  Press the BACK button to return to the main screen for 

the selected cycle. 

There are 3 drying settings:

Factory preset dryness level.

Slightly drier clothes, 15% more drying time.

Much drier clothes, 30% more drying time.

NOTE: The settings cannot be changed while the dryer  

is running or paused. The dryer must be in standby mode  

(the power button is off) to adjust the default settings.