Whirlpool mede250 Installation Instruction

Place 

level here

       Not Level 

            

lEVEl                    Not Level

Check levelness of dryer from side to side. Repeat from  

front to back. 

noTE: The dryer must be level for the moisture sensing system 

to operate correctly.

Move dryer to final location, taking care not to crush or kink 

vent.

After dryer is in place, remove corner posts and cardboard 

from under dryer.

Check that the water faucets are turned on.

Check for leaks around “Y” connector, faucet, and hoses.

Using a 4" (102 mm) clamp, connect vent to exhaust outlet  

in dryer. If connecting to existing vent, make sure vent is 

clean. Dryer vent must fit over dryer exhaust outlet and inside 

exhaust hood. Check that vent is secured to exhaust hood 

with a 4" (102 mm) clamp.