Whirlpool WED8500S User Manual

Page of 28
21
Additional Features
WRINKLE SHIELD™ Feature 
The WRINKLE SHIELD™ feature helps smooth out wrinkles that 
form when you cannot unload the dryer promptly at the end of a
cycle. During this option, the dryer stops tumbling and then 
tumbles again for a brief period.
Press the WRINKLE SHIELD™ feature to get up to
90 minutes of heat-free, periodic tumbling at the end  
of a cycle.
During the WRINKLE SHIELD™ feature, you may continue 
the option after opening and closing the dryer door by 
pushing START.
Cancel at any time by pressing the WRINKLE SHIELD™ 
feature button.
NOTE: If you do not select the WRINKLE SHIELD™ feature,  
the dryer stops after the cool down period.
Temperature
Temperature settings are used with the Manual Cycles. Press 
TEMP ADJUST until the desired temperature setting illuminates. 
Temperature modifiers cannot be used with the Auto Cycles. 
Air Only
Use the Air Only modifier for items that require drying without 
heat such as rubber, plastic, and heat-sensitive fabrics. This chart
shows examples of items that can be dried using Air Only.
*Reset time to complete drying, if needed.
When using Air Only
Check that coverings are securely stitched.
Shake and fluff pillows by hand periodically during the cycle.
Dry item completely. Foam rubber pillows are slow to dry.
NOTE: Auto Cycles are not available when you are using the Air 
Only setting.
End of Cycle Signal
The End of Cycle Signal produces an audible sound when the 
drying cycle is finished. Promptly removing clothes at the end  
of the cycle reduces wrinkling.
Press and release the END OF CYCLE SIGNAL to turn off the 
signal.
Hold the END OF CYCLE SIGNAL for 3 seconds to lock or unlock
this control.
NOTE: When the WRINKLE SHIELD™ feature is selected and the 
End of Cycle Signal is on, an audible sound will be emitted every
5 minutes until the clothes are removed, or the WRINKLE 
SHIELD™ feature is finished.
Changing Cycles, Options and Modifiers
You can change Auto Cycles, Timed Cycles, Modifiers and 
Options anytime before pressing Start.
Three short tones sound if an unavailable combination is 
selected. The last selection will not be accepted.
Changing Cycles after pressing Start
1. Press STOP twice. This ends the current cycle.
2. Select the desired cycle and options.
3. Press and hold START. The dryer starts at the beginning of
the new cycle.
NOTE: If you do not press Start within 5 minutes of selecting the 
cycle, the dryer automatically shuts off.
Changing Modifiers and Options after pressing Start
You can change a Modifier or Option anytime before the selected 
Modifier or Option begins.
1. Press STOP once.
2. Select the new Modifier and/or Option.
3. Press and hold START to continue the cycle.
NOTE: If you happen to press Stop twice, the program clears and 
your dryer shuts down. Restart the selection process.
Drying Rack Option
Use the Drying Rack to dry items such as sweaters and pillows 
without tumbling. The drum turns, but the rack does not move. 
If your model does not have a drying rack, you may be able to
purchase one for your model. To find out whether your model 
allows drying rack usage and for more information on ordering,
please refer to the front page of the manual or contact the dealer
from whom you purchased your dryer. 
NOTE: The rack must be removed for normal tumbling. Do not
use the automatic cycle with the drying rack.
*
e
m
i
T
d
a
o
L
f
o
e
p
y
T
(Minutes)
Foam rubber - pillows, padded bras, stuffed toys
20 - 30
Plastic - Shower curtains, tablecloths
20 - 30
0
5
-
0
4
s
g
u
r
d
e
k
c
a
b
-
r
e
b
b
u
R
Olefin, polypropylene, sheer nylon
10 - 20