Whirlpool WGD9470W User Manual

Page of 28
8
Manual Cycles
Use Manual Cycles to select a specific amount of drying time and 
a drying temperature. When a Manual Cycle is selected, the 
Estimated Time Remaining display shows the actual time 
remaining in your cycle. You can change the actual time in the 
cycle by pressing the DRY TIME up or down buttons.
Manual Cycles
 
Load Type
Temperature
Est. Cycle 
Time*
(Minutes)
TIMED DRY 
 
Heavyweight items, 
 
bulky items, bedspreads, 
work clothes
High
40
TOUCH UP
Helps to smooth out 
wrinkles
Medium
15
QUICK DRY
 
Small loads
 
(On some models - Default)
Medium
High
High
15
15
21
Manual Preset Cycle Settings
*Reset time to complete drying, if needed.
Air Only
Use Timed Dry/Air Only temperature setting for items that require 
drying without heat such as rubber, plastic, and heat-sensitive 
fabrics. This chart shows examples of items that can be dried 
 
using Air Only.
Type of Load
Est. 
Time*
(Minutes)
Foam rubber - pillows, padded bras, stuffed toys
20 - 30
Plastic - shower curtains, tablecloths
20 - 30
Rubber-backed rugs
40 - 50
Olefin, polypropylene, sheer nylon
10 - 20
*Reset time to complete drying, if needed.
When using Air Only
Check that coverings are securely stitched.
Shake and fluff pillows by hand periodically during the cycle.
Dry item completely. Foam rubber pillows are slow to dry.
NOTE: Automatic Cycles are not available when using the Air Only 
setting.
Steam Cycles
In these cycles, a small amount of water is sprayed into the dryer 
drum after several minutes of tumbling with heat. The STEAM 
Status Light will come on while the water is sprayed into the drum. 
The dryer will continue to tumble at Medium heat for the duration 
of the cycle. The Steam Cycles include Quick Refresh and 
Enhanced Touch Up. The heat setting and cycle time are not 
adjustable for the Quick Refresh Cycle, but can be adjusted for 
the Enhanced Touch Up Cycle.
NOTE: Results may vary depending on fabric. 100% cotton 
garments with wrinkle-free finish may yield better results than 
 
those without.
Use of a fabric softener sheet is not recommended with steam 
cycles as it may cause temporary staining on the clothes.
Steam Preset Cycle Settings
Timed Cycles
 
Load Type
Default 
Temperature*
Est. Time*
(Minutes)
QUICK REFRESH
 
Helps to smooth out 
wrinkles and reduce odors 
from loads consisting of 
one to four dry items.
Medium
15
ENHANCED TOUCH UP 
 
Helps to smooth out 
wrinkles in loads left in the 
dryer for an extended 
period.
Medium
20
*The Enhanced Touch Up Cycle has a minimum dry time of 
15 minutes and a maximum dry time of 40 minutes. Only the 
Medium and High temperature settings can be used for the 
Enhanced Touch Up Cycle.
Additional Features
Drum Light
When pressed during a cycle, the Drum Light turns on and will 
remain on until pressed again, the door is opened and closed, or 
the door is left open for 20 minutes. 
WRINKLE SHIELD™ Feature 
When you are unable to remove a load of clothes from the dryer 
as soon as it stops, wrinkles can form. The WRINKLE SHIELD™ 
feature periodically tumbles, rearranges, and fluffs the load to help 
keep wrinkles from forming.
Get up to 140 minutes of heat-free, periodic tumbling at the 
end of a cycle. Turn off at any time by pressing the WRINKLE 
SHIELD™ feature or opening the dryer door.
For the Casual Cycle, the WRINKLE SHIELD™ feature is 
preset to “ON.” The other cycles will retain the WRINKLE 
SHIELD™ feature setting. (The Wrinkle Shield feature is preset 
to “ON” for the Casual Cycle. If selected for other cycles, it will 
remain “ON” the next time that cycle is selected.)