Whirlpool wed94hex User Guide

Press and hold the START/PAUSE button to begin the cycle.

Temperature

Cycle Signal

Dryness Level Garment #

for auto cycles for refresh cycles

Air Only

Extra Low

Medium
Low

High

Less Dry

Normal Dry

More Dry

6 - 7

8 - 9

2 - 3
1

4 - 5

Soft
Off

Loud

Wrinkle

Shield

Done

Wet

Damp Cool

Down

Steam Static

Reduce

Check Lint Screen Sensing

Estimated Time Remaining

Timed Dry Adjust

Promptly remove garments after cycle 

has completed to reduce wrinkling. If 

you will be unable to remove the load 

promptly, select the Wrinkle Shield/Wrinkle Shield with Steam 

option before pressing START/PAUSE.

Temperature

Cycle Signal

Dryness Level Garment #

for auto cycles for refresh cycles

Air Only

Extra Low

Medium
Low

High

Less Dry

Normal Dry

More Dry

6 - 7

8 - 9

2 - 3
1

4 - 5

Soft
Off

Loud

Wrinkle

Shield

Done

Wet

Damp Cool

Down

Steam Static

Reduce

Check Lint Screen Sensing

Estimated Time Remaining

Timed Dry Adjust

You may adjust different settings, depending on whether you 

have selected an Auto Cycle, Manual Cycle, or Steam Cycle. 

See the Cycle Guide for detailed information.
NOTE: Not all options and settings are available with all cycles. 

Not all cycles are on all models.
Auto Cycles:

You can select a different dryness level, depending on your 

load, by pressing the button for More, Normal, or Less.  

Selecting More, Normal, or Less automatically adjusts the  

dryness level at which the dryer will shut off. Once a dryness 

level is set, it cannot be changed without stopping the cycle.
Automatic cycles give the best drying in the shortest time.  

Drying time varies based on fabric type, load size, and  

dryness setting.
Manual Cycles:

When you select a Manual Cycle, the default  

time appears in the display. Use the s and t  

buttons to increase or decrease the time in  

1 minute increments. Press and hold to  

change the time in 5 minute increments. 
The default temperature may be changed 

by pressing the Temperature button until the 

desired dry temperature is lit.
Quick Refresh with Steam:

Press the Garment # to select the number of garments in  

the load (on some models). The dryer will automatically set the 

drying time and temperature. For models without Garment #, 

the cycle time is preset to 15 minutes and is not adjustable.

Add additional options such as Static Reduce, Wrinkle Shield/

Wrinkle Shield with Steam and/or EcoBoost by pressing the 

button for that option.
NOTE: Not all options and settings are available with all cycles.

Wrinkle Shield

with Steam

Wrinkle Shield

with Steam

11-cycle model shown

11-cycle model shown

Temperature

Cycle Signal

Dryness Level Garment #

for auto cycles for refresh cycles

Air Only

Extra Low

Medium
Low

High

Less Dry

Normal Dry

More Dry

6 - 7

8 - 9

2 - 3
1

4 - 5

Soft
Off

Loud

Wrinkle

Shield

Done

Wet

Damp Cool

Down

Steam Static

Reduce

Check Lint Screen Sensing

Estimated Time Remaining

Timed Dry Adjust

11-cycle model shown

If all your loads on all Auto Cycles are consistently not as 

dry as you would like, you may change the default  

settings to increase the default dryness level.
Your automatic drying settings can be adjusted to adapt to 

different installations, environmental conditions or personal 

preference. This change is retained and will affect all of your 

Automatic cycles, not just the current cycle/load. There 

are 3 drying settings, which are displayed using the time 

display:

01  Factory preset dryness level.

02  Slightly drier clothes, 15% more drying time.

03  Much drier clothes, 30% more drying time.

NOTE: The settings cannot be changed while the dryer is 

running or paused. The dryer must be in standby mode (the 

power button is off) to adjust the default settings.

1.  Before starting a cycle, press and hold the TEMP button 

for 6 seconds. 

2.  Press the TEMP button to select the dryness level 

shown in the time display: 01, 02, or 03. 

3.  Press START/PAUSE to save the new dryness level  

setting.