Trendnet teg-s2500i  Installation Guide

2 

Unpacking   

Open the shipping carton of the Switch and carefully unpack its contents, the carton 

should contain the following items: 

 
z  One

 24+2G, 

24 port Fast Ethernet Layer 2 Switch. 

z  Mounting Kit: 2 mounting brackets and screws 
z  Four rubber feet with adhesive backing. 
z  One AC power cord. 
z  One RS-232 cable   
z  This Quick Installation Guide and CD. 

 

Follow the guidelines 

below 

to install the Switch. 

 
z  Do not place 

any object weighted more than 3Kg (6.6 lb) on the Switch.

 

z  Connect the power cord to the Switch and the power outlet. 
z  Leave at least 10 cm (4 inches) of space around the Switch for heat dissipation.   

 

When installing the Switch on the desktop or shelf, please attach the rubber feet to the 

Switch. Peel off the protective paper on the pads and attach them on the bottom of the 

Switch (one at each corner). 

 

The 24+2G Switch is rack-mountable and you can install the Switch on an EIA-19 inch 

equipment rack. To do this, first install the mounting brackets on the Switch’s side panels 

(one on each side), secure them with the included screws, and then use the screws 

provided with the equipment rack to mount the Switch on the rack.