RadioShack 16-913 User Guide
19
A
d
va
n
ce
d
S
e
tt
in
g
s
n
Note: You can also use the ASPECT button on the remote control to cycle through the
aspect ratio options.
Color Temperature
Color Temperature
Normal – Does not enhance colors for warmth or coolness.
Cool – Provides more blue/green tones.
Warm – Provides more yellow/orange/red tones.
n
Note: The tones in the Warm setting are considered the most accurate for viewing
standard broadcasts.
Noise Reduction
Use this setting to change the level of noise reduction on the TV. These levels are subjective.
Noise Reduction
Use this setting to change the level of noise reduction on the TV. These levels are subjective.
What works for one person may not work for another.
Off
Low (Default setting)
Medium
High
3D Y/C settings:
Your television is equipped with a 3D Y/C filter, which is designed to prevent the degredation
Your television is equipped with a 3D Y/C filter, which is designed to prevent the degredation
and warping of regular analog signals sent through Composite or RF cables.
On or Off
Gradient Enable
Turn this setting On to allow for the gradual blending of colors. Turn it Off to reduce
Turn this setting On to allow for the gradual blending of colors. Turn it Off to reduce
blending.
Blue Screen
Turn this setting On to show a blue screen when a channel is not receiving an adequate
Blue Screen
Turn this setting On to show a blue screen when a channel is not receiving an adequate
signal. Turn Off to show a black screen when the signal is inadequate. Defaults to On.
Audio Settings
Use Preset Audio Settings
Change audio settings based on preselected criteria.
1.
Press MENU on the TV or remote control. The main menu displays.
2.
Press or to select Sound, then press OK or .
3.
Press or to highlight Equalizer mode.
4.
Press to select User, Standard, Movie, Music, or News.
5.
Press MENU to accept changes and go back to the previous menu.
Customize Audio Settings
1.
Follow Steps 1 through 3 under “Use Preset Audio
Settings.” Choose User.
2.
Press or to highlight Balance, Audio Channel,
Audio Language 1, Audio Language 2, or Advanced
Audio.
3.
Press OK or to change settings, and use or to
navigate.
4.
Press MENU to accept changes and go back to the previous menu.