RadioShack 16-913 User Guide

Change picture settings based on preselected criteria.

  Press MENU on the TV or remote control. The main 

menu displays.

  Press  or  on the TV or remote control to select 

Picture, then press OK or .

  Press  or  to highlight Picture Mode, press , and select Standard, Vivid, Bright, 

or User.

 Note: The Standard setting is recommended for most viewing environments. 

4.  Press MENU to accept changes and go back to the menu.

  Follow Steps 1 through 4 under “Use Preset Picture Settings.” Set Picture Mode to 

User.

  Press  or  to select Brightness, Contrast, Color, Sharpness, or Tint, then press 



.

  Press  or  to adjust the picture settings.

  Press MENU to go back to the previous menu.

  Follow Steps 1 through 4 under “Use Preset 

Picture Settings.” Set Picture Mode to User.

  Press  or  to select Advanced Video. Press OK 

or  to go to the next screen.

  Press  or  to select Aspect Ratio, Color 

Temperature, Noise Reduction, 3D Y/C, Gradient 

Enable, or Blue Screen, then press  or  to 

adjust settings (explained below).

  Press MENU to accept changes and go back to the previous menu.

 

„

Normal – Recommended for viewing content broadcast in 4:3 widescreen. Adds black 

bars on either side of the image to avoid image distortion.

 

„

Wide – Stretch some 4:3 content. Reduces or eliminates black bars, but may distort 

image.

 

„

Zoom – Stretch an image vertically and horizontally to fill the screen while viewing 4:3 

widescreen content. No distortion, but parts of the image may be cut off.

 

„

Cinema – Fills the entire screen and eliminates black bars. May cut off parts of images, 

but will not distort or stretch the picture.