LG SA560 User Manual

To prevent the screen image from 
becoming trapezoidal, 

Keystone adjusts 

the top and bottom width of the image 
if the projector is not set up at a right 
angle to the screen.
Because the 

Keystone function may 

cause inferior screen image quality, use 
this function only when it is not possible 
to set up the projector at an optimal 
angle.

•Keystone  0

-  

+

CLOSE

 Press the 

KEY.S ꔌ or KEY.S ꔍ but-

ton to adjust the picture.

 

y

Keystone can be adjusted 

from 

-40 to 40.

 Press the 

OK button when done.

 Press the 

INPUT button to display the 

input selection screen.
- The connected input mode appears 

first. 

Component

RGB-PC 2

RGB-PC 1

HDMI

Change Device Name

Input List

Select an input device to view.

AV

 Select an input signal using the 

remote control's 

INPUT button to 

connect the projector to the desired 

input.  You can use the   or   

button to switch between all the input 

modes.

Displays which devices are connected to 
which input ports.

Input List

Select an input 

AV

Component

RGB-PC2

RGB-PC1

HDMI

Select a device to change name.

Input Label

Close

Change Device Name

 Press the 

INPUT button to display the 

input selection screen.

 Press the 

red button.

 Press the   or    button to go to the 

desired input and press the 

OK button.

 User the  ,  ,   or   button to 

select a device name.