LG KA80610F Owner's Manual

Before connecting, check that the nominal voltage of the appliance,
that is the voltage stated on the rating plate, corresponds to the
available supply voltage. The rating plate is located on the lower
casing of the hob.

Shut off power to circuit before connecting hob wires to circuit.

The heating element voltage is AC230V~. The appliance also works
perfectly with AC220V~ and AC 240V~.

The hob is to be connected to the mains using a device that allows
the appliance to be disconnected from the mains at all poles with a
contact opening width of at least 3 mm, eg. automatic line
protecting cut-out, earth leakage E.L.C.B..

A type H05SS-F (180°C) cable or one with a higher grade must be
used as the mains connecting cable.

The connection must be carried out as shown in the diagram. The
connecting links should be fitted according to the appropriate
connection diagram. The earth lead is connected to terminal      .
The earth lead must be longer than leads carrying electric current.

Finally, the connecting cable is to be secured with the mains cable
cleat and the covering closed by pressing firmly (lock into place).

Before switching on for the first time, any protective foil or stickers
must be removed from the glass ceramic surface.

Once connected to the mains supply check that all cooking
zones are ready for use by briefly switching each on in turn at
the maximum setting.

When hob is initially powered, the displays will show flashing H.
This will also occur upon power outage.