LG LG LAS950M - HS9 User Manual

64

Oper

ating

 

y When using Bluetooth® technology, you 

have to make a connection between the 
unit and the bluetooth device as close as 
possible and keep the distance. 
However it may not work well in the case 
below :

 

- There is a obstacle between the unit and 

the bluetooth device.

 

- There is a device using same frequency 

with Bluetooth® technology such as a 
medical equipment, a microwave or a 
wireless LAN device.

 

y This unit supports Bluetooth auto pairing. 

However it does not operate in the case 
below:

 

- When you restart this unit.

 

- When you disconnect this unit by yourself. 

 

- When you disconnect this unit on the 

connected Bluetooth device.

 

y The sound may be interrupted when the 

connection is interfered with by the some 
other electronic wave.

 

y You cannot control the Bluetooth device 

with this unit.

 

y Pairing is limited to “One” Bluetooth® device. 

Multi-Pairing is not supported.

 

y Depending on the type of the device, 

you may not be able to use the Bluetooth 
function.

 

y You can enjoy using Bluetooth® when using 

Phone, MP3, Notebook, etc..

 

y The more distance between the unit and 

the bluetooth device, the lower the sound 
quality becomes.

 

y The Bluetooth® connection will be 

disconnected when the unit is turned off or 
the Bluetooth®  device gets too far from the 
unit.

 

y If the Bluetooth® connection is 

disconnected, connect the Bluetooth®  
device again.

 

y When a Bluetooth® device is not connected, 

“BT READY” appears on the display window.

 

,

Note

Make the sound clear when the volume is turned 
down (Dolby Digital only). Set to [DRC ON] by using 

DRC.

When receiving audio signals from TV, sound and 
images may not be matched. In the case, this 
function can adjust the delay time.

1. Press AV SYNC.
2. Use C/V to control the time which you 

can set at between 0 and 300 ms.

Press   (Mute) to mute your unit.
You can mute your unit, for example, to answer 
the telephone, “MUTE” is displayed in the display 
window.
To cancel it, press   (Mute) again on the remote 
control or change the volume level.