LG LG LAS950M - HS9 User Manual

Page of 79
Operating
66
Oper
ating
3
AUTO POWER On/Off
This unit automatically turns on and off by an input 
source : Optical.
When you turn on your TV or an external device 
connected to this unit, this unit recognizes the 
input signal and selects the optical function. You 
can hear the sound from your device.
This function turns on or off each time you press 
AUTO POWER.
 
y After the unit is turned on by AUTO POWER 
function, it will be automatically turned off if 
there is no signal for a certain period of time 
from the TV connected by LG Sound Sync 
(Optical).
 
y After the unit is turned on by AUTO POWER 
function, it will be automatically turned off if 
there is no signal for a certain period of time 
from the external device.
 
y If you turned off the unit directly, it cannot 
be turned on automatically by AUTO POWER 
function. However the unit can be turned 
on by AUTO POWER function when optical 
signal comes in after 5 seconds of no signal.
 
y Depending on the connected device, this 
function may not operate.
 
y If you want to use AUTO POWER, SIMPLINK 
must be turned off. It takes for about 30 
seconds to switch on or off SIMPLINK.
 
,
Note
Sound adjustment
Adjust volume level 
automatically
This unit supports Auto volume function that 
automatically adjusts the volume level.
When the output sound is too loud or too low, 
press AUTO VOL on the remote control. So you can 
enjoy the sound with appropriate levels.
To cancel this function, press the button again 
while “ON” is displayed.
Adjust the Treble/Bass/Sub-
woofer
You can adjust the sound level of Treble, Bass and 
Subwoofer as your preference.
TREBLE/BASS : -5 dB to 5 dB
SUBWF (Subwoofer) : -20 dB to 6 dB
1. Press   button repeatedly to select TREBLE, 
BASS or SUBWF (Subwoofer). 
2. Press VOL o/p to adjust the sound level.
Night mode
Set Night mode to On to reduce the sound 
intensity and improve fineness and softness.
Press   button on the remote control. So you can 
activate Night mode. To cancel it, press   button 
again.