LG DM5420K User Guide
Connecting
23
C
onnecting
2
LOCK (Parental Control)
Initial Setting of the Area Code
When you use this unit for the first time, you have
to set the Area Code as shown below.
1. Press SETUP on the remote control.
2. Select the [Lock] menu and then press d.
3. Press d. To access the [Lock] options, you must
to set the Area Code as shown below.
1. Press SETUP on the remote control.
2. Select the [Lock] menu and then press d.
3. Press d. To access the [Lock] options, you must
input the password you have created. Input a
password and press ENTERb. Enter it again
password and press ENTERb. Enter it again
and press ENTERb to verify. If you make a
mistake before pressing ENTERb, press CLEAR.
4. Select the first character by using w/s buttons.
5. Press d and select the second character by
5. Press d and select the second character by
using w/s buttons.
6. Press ENTERb to confirm your Area code
selection.
Rating
Blocks playback of rated DVDs based on their
contents. Not all discs are rated.
1. Select [Rating] on the [Lock] menu then press
contents. Not all discs are rated.
1. Select [Rating] on the [Lock] menu then press
d.
2. Input a password and press ENTERb.
3. Select a rating from 1 to 8 by using the w/s
3. Select a rating from 1 to 8 by using the w/s
buttons.
[Rating 1-8]
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
Rating one (1) has the most restrictions and
rating eight (8) is the least restrictive.
[Unlock]
If you select unlock, parental control is not active
and the disc plays in full.
If you select unlock, parental control is not active
and the disc plays in full.
4. Press
ENTERb to confirm your rating
selection.
Password
You can enter or change password.
1. Select [Password] on the [Lock] menu and then
1. Select [Password] on the [Lock] menu and then
press d.
2. Input a password and press ENTERb.
To change the password, press ENTERb when
the [Change] option is highlighted. Input a
password and press ENTERb. Enter it again
password and press ENTERb. Enter it again
and press ENTERb to verify.
3. Press SETUP to exit the menu.
If you forget your password, you can clear it by
using the following steps:
1. Press SETUP to display the Setup menu.
2. Input the 6-digit number “210499” and press
using the following steps:
1. Press SETUP to display the Setup menu.
2. Input the 6-digit number “210499” and press
ENTERb. The password is cleared.
,
Note
Area Code
Enter the code of the area whose standards were
used to rate the DVD video disc, based on the list
on page 38.
1. Select [Area Code] on the [Lock] menu then
used to rate the DVD video disc, based on the list
on page 38.
1. Select [Area Code] on the [Lock] menu then
press d.
2. Input a password and press ENTERb.
3. Select the first character by using w/s buttons.
4. Press d and select the second character by
3. Select the first character by using w/s buttons.
4. Press d and select the second character by
using w/s buttons.
5. Press ENTERb to confirm your Area code
selection.
DM5420K-FU.AUKRLLK_5068-ENG.indd 23
2012-07-12 12:03:06