LG 42LV555H Owner's Manual

28

206-4200

Teach To TV (TLL)

xxLD660H-UA00001.TLL

Return

 

 

Enter

USB Download Menu

Upgrade TV Software
Upgrade PTC Software

Teach To TV (TLL)

Teach To TV (TLX)

Return

 

 

Enter

Teach To TV

UPDATING...

Do not remove the USB from the port! 

Do not unplug!

!

50%

Teach Master TV Setup to Target TV
1.  Ensure the Target TV is in Pass-through Mode, and then use the 

Installer Remote to enter the Target TV Installer Menu: Press 

MENU repeatedly until the on-screen display of the TV setup 

menus no longer toggles, and then press 

9-8-7-6 + ENTER.

2.  Set Installer Menu item 

117 FACT DEFAULT to 001, and press 

ENTER. When the value changes back to 0, press ENTER again 

to exit the Installer Menu.  

3.  Tune/set the TV to an analog or digital channel or Aux input, (ideally 

the same source tuned for 2-5-5 + MENU Mode during the Master 

TV Setup procedure). 

4.  Plug the USB memory device with the .tll file into the Target TV 

USB IN port.

5.  Press 

MENU on the Installer Remote to display the TV setup 

menus. Use the arrow navigation keys to select/highlight the 

Option menu icon, and then press the number “7” key a total of 

seven times to display the USB Download Menu.

6.  Use the Up/Down arrow keys to select 

Teach To TV (TLL), and 

then press 

ENTER.

7.  Use the Up/Down arrow keys to select the Master TV Setup you 

want to install, and then press 

ENTER. Note: Filenames identify 

the TV and the TLL version (see example at right). 

  Teaching status will be shown on the progress bar. When the 

Teaching process is complete, the USB Download menu will  

reappear on screen. 

8.  When Teaching is done, remove the USB memory device from 

the Target TV, turn OFF the TV, and unplug the TV power cord for 

15 seconds.

9.  Reconnect the TV power cord, and turn ON the TV. The Master 

TV Setup should be resident on the Target TV.