LG 42LV555H Owner's Manual

206-4200

Clone Programmer Cloning Procedures

Learning / Teaching a Master TV Setup using a TLL-1100A Clone Programmer

Learn Setup from Master TV
1. Ensure the Master TV is set up completely and in Pass-through Mode.
2. Tune/set the TV to an analog channel or Aux input, and then plug one

end of the MPI cable into the TV MPI port.

3. Turn ON the TLL-1100A.
4. Use the

MODE button on the TLL-1100A to select Clone Mode.

5. Use the Left/Right arrows on the TLL-1100A to select the Memory CBank

(1 to 8) in which to store the Master TV Setup.

6. Plug the other end of the MPI cable into the MPI port on the bottom of the

TLL-1100A. The Clone Selection Menu will display on the TV screen.

7. Press

1 on the Installer Remote to select LEARN FROM TV from the

Clone Selection Menu. Then, press

ENTER to transfer the Master TV

Setup into CBankX on the TLL-1100A.

Learning usually takes about 90 seconds. “LEARNING IN PROGRESS”

will be displayed on the screen while the TLL-1100A copies the Master

Setup. When the Learning process is complete, a “LEARNING COM-

PLETE” message will be displayed.

8. When Learning is complete, disconnect the MPI cable from the Master TV.

Cloning is accomplished using the

TV/clone programmer MPI ports for

communication (see figure).

TLL-1100A Cloning Notes
• Read the IMPORTANT CLONING

INFORMATION on page 24 before

beginning any cloning procedures.

• Ensure the TLL-1100A is either fully

charged or connected to AC power.

• Learning and Teaching is only

possible between identical model

TVs; however, the TLL-1100A can

store up to eight different Master

TV Setups.

Caution: Do not connect a clone programmer to a PPV card installed in the Master or Target

TVs. Also, if the TV is in LodgeNet PPV Mode (check with the site administrator if you are

not certain), do not connect a clone programmer to the GAME CONTROL/MPI port. Either of

these actions will damage the clone programmer and, if applicable, the PPV card.

Antenna

or CATV

CLONE SELECTION MENU

Selected Bank: CBankX Saved

(1) LEARN FROM TV

(2) TEACH TO TV

(3) SET CLONE CLOCK FROM TV

(4) SET TV CLOCK FROM CLONE

(5) DISPLAY TV SETUP

(6) DISPLAY CLONE SETUP

TV Link

Loader

TLL1100A

Ready

TLL-1100A

ENTER

RECEIVE

SEND

MODE

CHARGE

MPI

Cable

TLL-1100A Clone

Programmer

CLONE SELECTION MENU

Selected Bank: CBankX Saved

(1) LEARN FROM TV

(2) TEACH TO TV

(3) SET CLONE CLOCK FROM TV

(4) SET TV CLOCK FROM CLONE

(5) DISPLAY TV SETUP

(6) DISPLAY CLONE SETUP

CLONE CLOCK = XX:XX

TV CLOCK = XX:XX

THE CLONE IS VERSION VX.X.X

To change menu items, press

channel keys or digits.

To execute item, press Enter.