Sony DPT-S1 Manual
81
Precautions
Safety Information
Handling the Digital Paper device
If the device causes interference to radio or
television reception, turn the device off and move it
away from the radio or television.
Refrain from using the device according to the in-
flight announcements during take off or landing in
an aircraft.
When you put the device into a bag, make sure no
objects with sharp or hard edges come into direct
contact with the device.
When you carry the device, it is recommended to
use the supplied sleeve case.
Do not drop, or put any heavy object on top of the
device or apply a strong shock to the device. It may
cause a malfunction or damage.
Never subject the device to extremes of light,
temperature, moisture or vibration.
If part of the device that generates heat contacts
your skin for a prolonged period, you may suffer
from symptom of burn, such as redness, swelling,
from symptom of burn, such as redness, swelling,
even if temperature is moderate. Avoid prolonged
contact, especially if you have sensitive skin.
Do not leave the device on an unstable surface.
Do not poke people using the supplied stylus.
Do not treat or use the supplied stylus roughly, such
Do not poke people using the supplied stylus.
Do not treat or use the supplied stylus roughly, such
as bending it, or scratching the touchscreen with it.
Use the supplied stylus only for touchscreen
operations.
Do not use the stylus if it is damaged or deformed.
Do not subject the stylus to shock or vibration.
Do not apply any excessive pressure to the stylus tip
Do not subject the stylus to shock or vibration.
Do not apply any excessive pressure to the stylus tip
and stylus button during operation.
Do not keep the stylus tip pressed while the stylus
is not in use.
Do not locate the stylus close to a magnet.
If any object is placed on the touchscreen, it may
If any object is placed on the touchscreen, it may
cause a malfunction. When not in use, leave the
device in sleep mode, or turn it off.
When using the device internationally, it is your
responsibility to ensure that it is used in compliance
with the following specifications:
AC voltage
Wireless products regulations
Other safety regulations or requirements
with the following specifications:
AC voltage
Wireless products regulations
Other safety regulations or requirements
Be sure not to short-circuit the terminals of the
device with metallic objects.
Never leave the device exposed to high
temperature, such as in a car parked in the sun or
under direct sunlight.
under direct sunlight.
Connect the AC adapter to an easily accessible AC
outlet. Should you notice an abnormality in the AC
adapter, disconnect it from the AC outlet.
Avoiding water and moisture
Note that condensation may form temporarily in
cases such as when the player is moved quickly
from a low-temperature environment to a high
temperature environment or used in a room that
temperature environment or used in a room that
has a heater just turned on. Condensation creates a
phenomenon where moisture in the air adheres to
surfaces such as metal panels, etc., and then
surfaces such as metal panels, etc., and then
changes to liquid. If condensation forms in the
device, leave it turned off until the condensation
disappears. If you use the device with condensation
disappears. If you use the device with condensation
present, a malfunction may result.
The Digital Paper device is not waterproof.
Remember to follow the precautions below.
Be careful not to drop the device into a sink or
Be careful not to drop the device into a sink or
other container filled with water.
Do not use the device in humid locations or bad
weather, such as in the rain or snow.
Do not get the device wet.
If you touch the device with wet hands, or put it in a
damp article of clothing, the device may get wet and
this may cause a malfunction.
this may cause a malfunction.
Charging the Digital Paper device
Heat may build up in the device while charging, or if
it is used for an extended period of time.
Use the supplied USB cable or the AC adapter only.
Do not use any other USB cable or AC adapter.
Never wrap the device in anything when it is being
charged. Heat build-up in the device may cause
malfunction or damage.