KitchenAid 27" Combination Wall Oven with Even-Heat™ True Convection (lower oven) Installation Instruction

Gather the required tools and parts before starting installation. 
Read and follow the instructions provided with any tools listed 
here.

■

Phillips screwdriver

■

Measuring tape

■

Drill (for wall cabinet installations)

■

¹⁄₈" (3 mm) drill bit (for wall cabinet installations)

■

Level

■

Flat-blade screwdriver

■

(4) #8-14 x 1" screws

■

(2) #8-18 x 

³⁄₈" screws - bottom vent included with built-in 

oven

■

Bottom vent included with built-in oven

■

Deflector bracket

■

(2) Plastic spacers

■

#8-18 x 

¹⁄₄" screws - (2) for 27" (68.6 cm) models); (4) for 

30" (76.2 cm) models - deflector bracket

■

(4) #8-18 x 

³⁄₈" screws - oven feet

■

(2) feet

■

(2) front feet

IMPORTANT: Observe all governing codes and ordinances. 
NOTE: Refer to the following “Location Requirements” and the 
“Location Requirements” section of the Installation Instructions 
provided with your built-in oven.

■

Cabinet opening dimensions that are shown must be used. 
Given dimensions provide minimum clearance for the oven.

■

The recessed installation area must provide complete 
enclosure around the recessed portion of the oven. 

■

The oven support surface must be solid, level and flush with 
the bottom of the cabinet cutout. 

■

The floor must be able to support a total weight (microwave 
and built-in oven) of 208 lbs (95 kg) for 27" (68.6 cm) models 
or 249 lbs (113 kg) for 30" (76.2 cm) models. 

IMPORTANT: To avoid damage to your cabinets, check with 
your builder or cabinet supplier to make sure that the 
materials used will not discolor, delaminate or sustain other 
damage. This oven has been designed in accordance with the 
requirements of UL and CSA International and complies with 
the maximum allowable wood cabinet temperatures of 194°F 
(90°C).

All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.

We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety 
messages.

This is the safety alert symbol.

This symbol alerts you to potential hazards that can kill or hurt you and others.

All safety messages will follow the safety alert symbol and either the word “DANGER” or “WARNING.”

These words mean:

¹⁵⁄₁₆

¹⁵⁄₁₆

A