KitchenAid 27" Combination Wall Oven with Even-Heat™ True Convection (lower oven) Installation Instruction

■

Refer to the following “Installation Instructions” and the 
“Installation Instructions” section of the Installation 
Instructions provided with your built-in microwave/oven 
combination.

■

Refer and adhere to the “Electrical Requirements” section and 
complete the instructions in the “Make Electrical Connection” 
section of the Installation Instructions provided with your built-
in microwave/oven combination.

1. Decide on the final location for the oven. Avoid drilling or 

cutting into house wiring during installation. 

2. To avoid floor damage, set the oven on cardboard prior to 

installation. Do not use the handle or any portion of the front 
frame for lifting.

3. Remove the shipping materials and tape from the oven. 

Remember to keep the corner posts and other materials that 
may be needed for installation.

4. Remove the hardware package from inside the bag containing 

literature.

5. Move the oven and cardboard close to the oven’s final 

location.

IMPORTANT: Use two hands to remove the oven door.
1. Prior to removing the oven door, prepare a surface where you 

will place it. This surface should be flat and covered with a soft 
blanket, or use the corner posts from your packaging material.

2. Open the oven door.
3. Locate the oven door hinge locks in both corners of the oven 

door, and rotate the hinge locks toward the oven door to the 
unlocked position. If the door hinge lock is not rotated fully 
(see illustration B), the door will not remove properly.

4. Partially close the door to engage the door latch locks. The 

door will stop at this point.

5. Using two hands, grasp the edges of the oven door. Lift and 

pull the oven door toward you and remove it. You may need to 
gently shift the door from side to side as you pull. 

6. Set the oven door aside on the prepared covered work 

surface, with the oven door resting on its handle.

7. To continue with the oven installation, go to the “Positioning 

Oven Feet” section.

1. Using two hands, grasp the side edges of the door at the 

midpoint. Face the oven cavity.

2. Locate the slots on each side of the oven cavity for the door 

hinge locks.

A

B

A