KitchenAid 27" Double Wall Oven with Even-Heat™ True Convection Installation Instruction
7
1. Using 2 or more people, place the oven on its back on a
covered surface.
2. Install a foot on the left rear spacer using a #8-18 x
3
/
8
"
screw.
NOTE: Position the foot so the long side of the foot is
facing toward the top of the oven.
3. In the same manner, install a foot on the right rear of the
oven.
4. Install a front foot on the left front spacer using a #8-18 x
3
/
8
" screw.
NOTE: Position the foot so the long side of the foot is
facing toward the inside of the oven.
5. In the same manner, install a front foot on the right front of
the oven.
6. Using 2 or more people, place the oven in its upright
position.
7. Go to the “Make Electrical Connection” section in the
Installation Instructions provided with your built-in oven.
Replace Plastic Spacers
Replace Plastic Spacers on Single Ovens
1. Remove the screw attaching the plastic spacer (A) to the
right side of the oven.
2. Using the screw removed, install a new plastic spacer (B)
provided with this kit.
A
B
C
A. Spacer
B. Foot
C. #8-18 x
B. Foot
C. #8-18 x
3
/
8
" screw
A
B
C
A. Front foot
B. #8-18 x
B. #8-18 x
3
/
8
" screw
C. Spacer
A. Plastic spacer
B. New plastic spacer
B. New plastic spacer
A
B