Canon imageRUNNER ADVANCE C9075S PRO Manual
Checking the breaker
1.
Push the test button on the rear of the machine with the tip of a ballpoint pen, or a sim-
ilar object.
ilar object.
#
IMPORTANT
•
Briefly push the test button.
#
NOTE
•
The breaker is located on the rear of the machine.
2.
Confirm that the breaker lever is switched to the OFF ("O" side) position.
ON
( I side)
OFF
( side)
#
IMPORTANT
•
Do not use the test button to turn the power ON and OFF.
If the breaker lever does not switch to the OFF ("O" side) position, repeat step 1.
If the breaker lever does not switch to the OFF ("O" side) position, despite carrying
out the above procedure two or three times, contact your local authorized dealer.
If the breaker lever does not switch to the OFF ("O" side) position, repeat step 1.
If the breaker lever does not switch to the OFF ("O" side) position, despite carrying
out the above procedure two or three times, contact your local authorized dealer.
Chapter 6 - Inspection of the breaker
41
Checking the breaker