Canon imageRUNNER ADVANCE C9075S PRO Manual
Change the binding edge
Introduction
The binding edge determines whether the binding position is along the long edge or the
short edge of the media. The binding edge is usually set via the printer driver, for example.
However, you can view and change the binding edge via the operator panel. The binding
edge has a relation with the direction of the margin shift, orientation and staple position.
short edge of the media. The binding edge is usually set via the printer driver, for example.
However, you can view and change the binding edge via the operator panel. The binding
edge has a relation with the direction of the margin shift, orientation and staple position.
#
NOTE
When the binding edge is changed for '2-sided' printing, the image orientation is
automatically adjusted to get the correct layout. The orientation of the image on the
back side of the page will be changed too.
automatically adjusted to get the correct layout. The orientation of the image on the
back side of the page will be changed too.
How to change the binding edge
1.
Touch 'Jobs' -> 'Waiting jobs'.
2.
Touch the job you want to change.
#
NOTE
You can only change the settings of the active print job after you stopped the
printer (press the 'Stop' button two times).
printer (press the 'Stop' button two times).
3.
Touch 'Properties', or touch the job two times to open the 'Properties' window.
4.
Touch the 'Binding edge' button.
5.
Touch the desired value.
6.
Press 'OK'.
7.
Press 'OK'.
Chapter 6 - Print jobs
160
Change the binding edge