Canon imageRUNNER ADVANCE C9075S PRO Manual
Adjust the integrated paper tray to hold a different paper
size.
size.
Introduction
If you want to load a different paper size into a paper drawer, follow the procedure de-
scribed below to adjust the paper drawer guides.
scribed below to adjust the paper drawer guides.
#
IMPORTANT
Only A4/LTR transparencies can be used. Make sure that the left guide is set to
A4/LTR when loading transparencies into a paper drawer. If transparencies of a dif-
ferent size (other than A4/LTR) are loaded into a paper drawer, the paper size and
remaining amount of paper is not correctly detected.
A4/LTR when loading transparencies into a paper drawer. If transparencies of a dif-
ferent size (other than A4/LTR) are loaded into a paper drawer, the paper size and
remaining amount of paper is not correctly detected.
Adjusting the paper tray to hold a different paper size
1.
Press and release the button on the paper drawer that you want to adjust. Grip the handle,
then pull out the paper drawer until it stops. Remove all of the remaining paper.
then pull out the paper drawer until it stops. Remove all of the remaining paper.
2.
Slide the left guide to align it with the mark for the desired paper size.
Left Guide
Slide the guide until it clicks into place.
Chapter 9 - Paper, toner, and staples
243
Adjust the integrated paper tray to hold a different paper size.