Canon imageRUNNER ADVANCE C9075S PRO Manual
Adjust the media size for the paper module
Introduction
This section explains how to change the paper size in the optional Multi-Drawer Paper
Deck-A1.
Deck-A1.
Adjust the media size for paper module
1.
Press the button on the paper deck that you want to adjust, and pull out the paper deck
until it stops. Slide the paper holder plate until it does not catch onto the paper you are
setting, then remove all the remaining paper.
until it stops. Slide the paper holder plate until it does not catch onto the paper you are
setting, then remove all the remaining paper.
The paper holder plate slides by holding it as shown in the diagram.
#
NOTE
It may take some time for the paper deck to open, even when pressing the Open
button.
button.
Chapter 9 - Paper, toner, and staples
252
Adjust the media size for the paper module