Canon imageRUNNER ADVANCE C9075S PRO Manual
Replace the staple cartridge in the stapler unit
Introduction
This section describes how to replace the staple cartridge in the stapler unit of Staple
Finisher-A1/Booklet Finisher-A1.
Finisher-A1/Booklet Finisher-A1.
#
IMPORTANT
•
•
Take care when handling the optional equipment that is attached to the machine.
When an optional unit's cover is opened to replace a staple cartridge, discard the
punch waste, discard the trim waste, or clear paper or staple jams, prints may still
be output if other optional units are operating normally and are not involved in
the paper or staple jam removal procedure.
When an optional unit's cover is opened to replace a staple cartridge, discard the
punch waste, discard the trim waste, or clear paper or staple jams, prints may still
be output if other optional units are operating normally and are not involved in
the paper or staple jam removal procedure.
#
NOTE
•
We recommend that you order staple cartridges from your local authorized dealer
before your stock runs out.
before your stock runs out.
•
Remove the orange seal that holds the staples together after you place the staple
cartridge into the staple case.
cartridge into the staple case.
Replace the staple cartridge in the stapler unit (A)
1.
Open the front cover of the finisher.
Chapter 9 - Paper, toner, and staples
308
Replace the staple cartridge in the stapler unit