Netgear M6100 – Campus Edge and SMB Core Chassis Switches Software Guide
Chassis Commands
42
M5300, M6100, and M7100 Series ProSAFE Managed Switches
The movemanagement command (see
28) also transfers control from the current management blade; however, the hardware
is cleared and all blades reinitialize.
show checkpoint statistics (for chassis configuration)
This command displays general information about the checkpoint service operation.
clear checkpoint statistics (for chassis configuration)
This command clears all checkpoint statistics to their initial values.
Format
initiate failover
Mode
Chassis Global Config Mode
Format
show checkpoint statistics
Mode
Privileged Exec
Parameter
Description
Messages Checkpointed
Number of checkpoint messages transmitted to the backup blade. Range:
Integer. Default:
Integer. Default:
0
Bytes Checkpointed
Number of bytes transmitted to the backup blade. Range: Integer. Default:
0
Time Since Counters Cleared
Number of days, hours, minutes and seconds since the counters were reset to
zero. The counters are cleared when a blade becomes manager and with a
support command. Range: Time Stamp. Default:
zero. The counters are cleared when a blade becomes manager and with a
support command. Range: Time Stamp. Default:
0d00:00:00
Checkpoint Message Rate
Average number of checkpoint messages per second. The average is
computed over the time period since the counters were cleared. Range:
Integer. Default:
Integer. Default:
0
Last 10-second Message Rate
Average number of checkpoint messages per second in the last 10-second
interval. This average is updated once every 10 seconds. Range: Integer.
Default:
Default:
0
Highest 10-second Message
Rate
Rate
The highest rate recorded over a 10-second interval since the counters were
cleared. Range: Integer. Default:
cleared. Range: Integer. Default:
0
Format
clear checkpoint statistics
Mode
Privileged Exec