Netgear M5300-52G-POE+ (GSM7252PSv1h2) - ProSAFE 48+4 L2+ POE Stackable Managed Switch Software Guide

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The web management interface menu displays.

Select Switching

> VLAN > Advanced > VLAN Trunking Configuration. 

Select the interface:

Select the Unit ID field to display physical port information for the selected unit.

Use LAG to display LAGs only.

Use All to display all physical ports.

Use Go To Interface to select an interface by entering its number.

Use Interface to select the interface for which data is to be displayed or configured.

In the Switchport Mode list, select one of the following:

. This mode is suitable for ports connected to end stations or end users. 

Access ports participate in only one VLAN. They accept both tagged and untagged 

packets, but always transmit untagged packets.

. This mode is intended for ports that are connected to other switches. Trunk 

ports can participate in multiple VLANs and accept both tagged and untagged 
packets.

. This mode enables custom configuration of a port. You configure the 

general port VLAN attributes, such as membership, PVID, tagging, ingress filter, and