Netgear M5300-52G-POE+ (GSM7252PSv1h2) - ProSAFE 48+4 L2+ POE Stackable Managed Switch Software Guide
Configure Switching Information
201
M6100, M5300, and M7100 Series Managed Switches
so on, using the settings on the Port Configuration screen. By default, all ports are
initially configured in General mode.
initially configured in General mode.
•
Host
. This mode is used for private VLAN configuration.
•
Promiscuous
. This mode is used for private VLAN configuration.
10.
Select from the list to configure the Access VLAN ID.
This is the access VLAN for the port, and is valid only when the port switchport mode is
Access
Access
.
11.
Select from the list to configure the Native VLAN ID.
This is the native VLAN for the port, and is valid only when the port switchport mode is
Trunk
Trunk
.
12.
Configure the Trunk Allowed VLANs.
This is the set of VLANs of which the port can be a member when configured in Trunk
mode. By default, this list contains all possible VLANs, even if they are not yet created.
VLAN IDs are in the range 1 to 4093. Use a hyphen (-) to specify a range, or a comma (,)
to separate VLAN IDs in a list. Spaces are not permitted. A zero value clears the allowed
VLANs. An All value sets all VLANs in the range (1 to 4093).
mode. By default, this list contains all possible VLANs, even if they are not yet created.
VLAN IDs are in the range 1 to 4093. Use a hyphen (-) to specify a range, or a comma (,)
to separate VLAN IDs in a list. Spaces are not permitted. A zero value clears the allowed
VLANs. An All value sets all VLANs in the range (1 to 4093).
13.
Click the Apply button.
The updated configuration is sent to the switch.Configuration changes take effect
immediately.
immediately.
The Native VLAN Tagging field displays enabled or disabled:
•
When VLAN tagging is enabled, if the trunk port receives untagged frames, it forwards
them on the native VLAN with no VLAN tag.
them on the native VLAN with no VLAN tag.
•
When VLAN tagging is disabled, if the trunk port receives untagged frames, it includes
the native VLAN ID in the VLAN tag when forwarding
the native VLAN ID in the VLAN tag when forwarding
Configure VLAN Membership
To configure VLAN membership:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.