Netgear M5300-52G-POE+ (GSM7252PSv1h2) - ProSAFE 48+4 L2+ POE Stackable Managed Switch Software Guide
Maintenance
732
M6100, M5300, and M7100 Series Managed Switches
The web management interface menu displays.
7.
Select Maintenance > Troubleshooting > Ping IPv4.
8.
Use IP Address/Host Name to enter the IP address or host name of the station for the
switch to ping.
The initial value is blank.
9.
In the Count field, enter the number of echo requests to send.
The default value is 3. The range is 1 to 15.
10.
Enter the Interval between ping packets in seconds.
The default value is 3 seconds. The range is 1 to 60.
11.
Enter the Datagram Size of ping packet.
The default value is 0 bytes. The range is 0 to 65507.
12.
Enter the Source IP address or interface to use when sending the echo request packets.
If source is not required, select None as the source option. Possible values are as
follows:
follows:
•
None
. The source address of the ping packet would be the address of the default
outgoing interface.
•
IP Address
. The source IP address to use when sending the echo request packets.
This field is shown when IP Address is selected as the source option.
•
Interface
. The interface to use when sending the echo request packets. This field is
shown when Interface is selected as the source option.
Note:
Values configured in the fields on this screen are not saved to the
switch. As a result, refreshing the screen sets these fields to the default
values.
switch. As a result, refreshing the screen sets these fields to the default
values.
13.
Click the Apply button.