Netgear M5300-52G-POE+ (GSM7252PSv1h2) - ProSAFE 48+4 L2+ POE Stackable Managed Switch Software Guide

The pings are sent to the specified address. The switch sends the number of pings 
specified in the Count field, and the results are displayed below the configurable data in 
the Results area. 

To cancel the operation on the screen and reset the data on the screen to the latest value of 
the switch, click the Cancel button.

This screen is used to send a ping request to a specified host name or IPv6 address. You can 
use this to check whether the switch can communicate with a particular IPv6 station. When 
you click the Apply button, the switch sends a specified number of ping requests and the 
results are displayed below the configurable data. The output displays the following:

Send count=n, Receive count=n from (IPv6 Address). Average round trip 

time = n ms.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The web management interface menu displays.

Select Maintenance > Troubleshooting > Ping IPv6.