Netgear M5300-52G3 (GSM7352Sv2h2) - ProSAFE 48 ports managed L3 gigabit stackable switch Software Guide
Utility Commands
312
M5300, M6100, and M7100 Series ProSAFE Managed Switches
no sflow receiver
Use this command to set the sFlow collector parameters back to the defaults.
sflow receiver owner timeout
Use this command to configure a receiver as a timeout entry. As the sFlow receiver is
configured as a timeout entry, information related to sampler and pollers are also shown in
the running-config and are retained after reboot.
configured as a timeout entry, information related to sampler and pollers are also shown in
the running-config and are retained after reboot.
If a receiver is configured with a specific value, these configurations are not shown in the
running-config
running-config
file. Samplers and pollers information related to this receiver are also not
shown in the running-config file.
sflow receiver owner notimeout
Use this command to configure a receiver as a non-timeout entry. Unlike entries configured
with a specific timeout value, this command will be shown in show running-config and
retained after reboot. As the sFlow receiver is configured as a non-timeout entry, information
related to sampler and pollers will also be shown in the running-config and will be retained
after reboot.
with a specific timeout value, this command will be shown in show running-config and
retained after reboot. As the sFlow receiver is configured as a non-timeout entry, information
related to sampler and pollers will also be shown in the running-config and will be retained
after reboot.
If a receiver is configured with a specific value, these configurations are not shown in the
running-config
running-config
file. Samplers and pollers information related to this receiver are also not
shown in the running-config file.
Format
no sflow receiver rcvr_idx [owner | maxdatagram | ip | port]
Mode
Global Config
Format
sflow receiver index owner owner-string timeout
Mode
Global Config
Field
Description
index
Receiver index identifier. The range is 1 to 8.
Receiver Owner
The owner name corresponds to the receiver name. The identity string for the receiver, the entity
making use of this sFlowRcvrTable entry. The range is 127 characters. The default is a null string.
The empty string indicates that the entry is currently unclaimed and the receiver configuration is
reset to the default values. An entity wishing to claim an sFlowRcvrTable entry must ensure that the
entry is unclaimed before trying to claim it. The entry is claimed by setting the owner string to a
non-null value. The entry must be claimed before assigning a receiver to a sampler or poller.
making use of this sFlowRcvrTable entry. The range is 127 characters. The default is a null string.
The empty string indicates that the entry is currently unclaimed and the receiver configuration is
reset to the default values. An entity wishing to claim an sFlowRcvrTable entry must ensure that the
entry is unclaimed before trying to claim it. The entry is claimed by setting the owner string to a
non-null value. The entry must be claimed before assigning a receiver to a sampler or poller.
Format
sflow receiver index owner owner-string notimeout
Mode
Global Config