Netgear GS728TP – 28PT GE POE SMART SWITCH Administrator's Guide
Configuring System Information
30
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
The following screen displays:
2.
In the Global Configuration Section, configure the following:
•
Admin Mode. Enable or disable the IPv6 network interface on the switch. The default
value is Enable.
•
IPv6 Address Auto Configuration Mode. The IPv6 address for the IPv6 network
interface is automatically configured if this option is enabled. The default value is
Disable.
interface is automatically configured if this option is enabled. The default value is
Disable.
•
IPv6 Gateway. Specify the gateway for the IPv6 network interface. The gateway
address is in IPv6 global or link-local address format.
address is in IPv6 global or link-local address format.
3.
Click APPLY to apply the changes to the system.
To modify IPv6 addresses on the network interface:
1.
Select System
Management
IPv6 Network Configuration.
2.
in the IPv6 Network Interface Configuration section, configure the following:
•
IPv6 Prefix/Prefix Length. Select an existing IPv6 prefix and prefix length from the
list, or add a new IPv6 prefix and prefix length to the list of IPv6 addresses. The
address is in the global address format.
list, or add a new IPv6 prefix and prefix length to the list of IPv6 addresses. The
address is in the global address format.
•
EUI64. Specify whether the IPv6 address is in EUI-64 format. The default value is
False.
False.
3.
Click ADD to add a new IPv6 address, or click DELETE to delete a selected IPv6
address from the list of IPv6 addresses.
4.
Click APPLY to apply the changes to the system.