Netgear GS728TP – 28PT GE POE SMART SWITCH Administrator's Guide
Configuring System Information
31
GS752TP, GS728TP, and GS728TPP Gigabit Smart Switches
IPv6 Network Neighbors
To view the IPv6 Network Interface Neighbors:
Select System
Management
IPv6 Network Neighbors.
The following screen displays:
Properties of each neighbor are displayed, as described below:
•
IPv6 Address. Specifies the IPv6 address of the neighbor interface.
•
MAC Address. Specifies the MAC address associated with the neighbor interface.
•
IsRtr. Indicates whether the neighbor is a router. If the neighbor is a router, the value is
True. If the neighbor is not a router, the value is False.
True. If the neighbor is not a router, the value is False.
•
Neighbor State. Specifies the state of the neighbor cache entry. The following are the
states for dynamic entries in the IPv6 neighbor discovery cache:
states for dynamic entries in the IPv6 neighbor discovery cache:
•
Reach. No more than ReachableTime milliseconds have elapsed since confirmation
was received that the forward path to the neighbor was functioning properly. When in
REACH state, the device takes no special action as packets are sent.
was received that the forward path to the neighbor was functioning properly. When in
REACH state, the device takes no special action as packets are sent.
•
Stale. More than ReachableTime milliseconds have elapsed since a confirmation was
last received that the forward path was functioning properly. While in STALE state,
the device takes no action until a packet is sent.
last received that the forward path was functioning properly. While in STALE state,
the device takes no action until a packet is sent.
•
Delay. More than ReachableTime milliseconds have elapsed since a confirmation
was last received that the forward path was functioning properly. A packet was sent
within the last DELAY_FIRST_PROBE_TIME seconds. If no confirmation is received
within DELAY_FIRST_PROBE_TIME seconds of entering the DELAY state, the
device sends a neighbor solicitation message and changes the state to PROBE.
was last received that the forward path was functioning properly. A packet was sent
within the last DELAY_FIRST_PROBE_TIME seconds. If no confirmation is received
within DELAY_FIRST_PROBE_TIME seconds of entering the DELAY state, the
device sends a neighbor solicitation message and changes the state to PROBE.
•
Probe. A confirmation is actively sought by repeatedly sending neighbor solicitation
messages every RetransTimer milliseconds until a confirmation is received.
messages every RetransTimer milliseconds until a confirmation is received.
•
Last Updated. Elapsed time since the address was last confirmed as reachable.