Netgear FS728TLP – ProSAFE 24 ports smart switch PoE User Guide

The following table shows the nonconfigurable fields in the IP ACL section of the screen 
and the information that is included in the IP ACL Table for each IP ACL.

Current Number of 

ACL(s)

The total number of configured ACLs, which is the sum of the configured MAC ACLs 
and the configured IP ACLs.

Maximum ACL(s)

The maximum number of MAC and IP ACLs that you can configure (100).

IP ACL ID

The ID of the ACL, which is an active link to the IP Rules screen for basic IP ACLs 
(with IDs 1 through 99) or to the Extended Rules screen for extended IP ACLS (with 
IDs 100 through 199).

Rules

The number of rules that are configured on the IP Rules screen for basic IP ACLs or 
on the Extended Rules screen for extended IP ACLs.

Type

The type of IP ACL, which can be Basic or Extended.

Once you have created an IP ACL, you cannot change its ID.



Select Security > ACL > Advanced > IP ACL. 

The IP ACL screen displays. 

Select the check box to the left of the IP ACL that you want to remove.

Click the Delete button.

The IP ACL is removed from the IP ACL Table.

You assign basic IP ACL rules to ACL IDs from 1 through 99. These rules specify whether 
incoming traffic that matches a source IP address is forwarded normally or discarded.

The last rule of the IP ACL table is a default deny all IP traffic rule to 
ensure that a packet is dropped if an ACL is applied to the packet 
and none of the explicit rules match. (IP ACL rules have a higher 
priority than MAC ACL rules.)