Netgear FS728TLP – ProSAFE 24 ports smart switch PoE User Guide
Manage Access Control Lists
210
ProSAFE FS526Tv2, FS726Tv2, and FS728TLP Smart Switches
Create a Rule for a Basic IP ACL
To create a rule for a basic IP ACL:
1.
Select Security > ACL > Advanced > IP Rules.
The IP Rules screen displays. The following figure shows two entries in the table as an
example.
example.
2.
From the ACL ID menu, select the ACL ID that you have defined on the IP ACL screen (see
208) and for which you want to add a rule.
The rule that you are creating applies to the selected basic IP ACL only.
3.
Configure the settings as described in the following table:
Settings
Description
Rule ID
The ID for the rule.
Enter a number from 1 to 10. You can create up to 10 rules for a single basic IP
ACL ID.
Action
Specify the action for the rule by selecting one of the following radio buttons:
•
Permit. Packets that meet the ACL criteria are forwarded.
•
Deny. Packets that meet the ACL criteria are dropped.
Assign Queue ID
Specify the egress queue that is used to handle all packets that match the ACL
rule.
rule.
From the menu, select the queue ID (0, 1, 2, 3, 4, 5, 6, or 7). This setting can
override the existing queue ID for a packet.
override the existing queue ID for a packet.