Netgear M5300-52G3 (GSM7352Sv2h2) - ProSAFE 48 ports managed L3 gigabit stackable switch Software Guide

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately.

The screen displays the VLAN IDs enabled for IGMP snooping querier.

You can configure IGMP queriers for use with VLANs on the network.



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The web management interface menu displays.

Select Switching

> Multicast > IGMP Snooping > Querier VLAN Configuration.

To create a new VLAN ID for IGMP snooping, select New Entry from the VLAN ID field and 

complete the following fields. 

You can also set pre-configurable snooping querier parameters.

. The VLAN ID for which the IGMP snooping querier is to be enabled. 

. Enable or disable querier Participate mode. 

. Upon seeing another querier of the same version in the VLAN, the 

snooping querier moves to the non-querier state.