Netgear M5300-52G3 (GSM7352Sv2h2) - ProSAFE 48 ports managed L3 gigabit stackable switch Software Guide
Configure Switching Information
264
M6100, M5300, and M7100 Series Managed Switches
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Switching
> Multicast > MLD Snooping > Configuration.
8.
Use MLD Snooping Admin Mode to select the administrative mode for MLD snooping for
the switch.
The default is Disable.
9.
Select the Proxy Querier Mode Enable or Disable radio button.
This enables or disables an MLD proxy querier on the system. If it is disabled, then an
MLD proxy query with source IP 0::0 is not sent in response to an MLD leave packet. If it
is enabled, then MLD proxy queries are sent. The default value is Enable.
MLD proxy query with source IP 0::0 is not sent in response to an MLD leave packet. If it
is enabled, then MLD proxy queries are sent. The default value is Enable.
10.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
To refresh the screen with the latest information on the switch, click the Update button.