Netgear M5300-28G3 (GSM7328Sv2h2) - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch Software Guide
IPv6 Multicast Commands
1169
M5300, M6100, and M7100 Series ProSAFE Managed Switches
show ipv6 pim rp-hash
This command displays which rendezvous point (RP) is being used for a specified group that
you must specify with the group-address argument.
you must specify with the group-address argument.
Command example:
(NETGEAR) #show ipv6 pim rp-hash 224.1.2.0
RP Address192.168.10.1
Type Static
Command example:
If no RP Group mapping exists on the router, the following message is displayed:
No RP-Group mappings exist/learned on this router.
show ipv6 pim rp mapping
Use this command to display the mapping for the PIM group to the active Rendezvous points
(RP) of which the router is a aware (either configured or learned from the bootstrap router
[BSR]). Use the optional parameters to limit the display to a specific RP address
(rp-address) or to view group-to-candidate RP (candidate) or group to Static RP
mapping information (static).
(RP) of which the router is a aware (either configured or learned from the bootstrap router
[BSR]). Use the optional parameters to limit the display to a specific RP address
(rp-address) or to view group-to-candidate RP (candidate) or group to Static RP
mapping information (static).
Format
show ipv6 pim rp-hash group-address
Modes
Privileged EXEC
User EXEC
Term
Definition
RP Address
The IPv6 address of the RP for the group specified.
Type
Indicates the mechanism (BSR or static) by which the RP was selected.
Format
show ipv6 pim rp mapping [rp-address | candidate | static]
Modes
Privileged EXEC
User EXEC
Term
Definition
RP Address
The IPv6 address of the RP for the group specified.
Group Address
The IPv6 address and prefix length of the multicast group.