Netgear M5300-28G3 (GSM7328Sv2h2) - ProSAFE 24+4 Gigabit Ethernet L3 Managed Stackable Switch Software Guide
IPv6 Multicast Commands
1170
M5300, M6100, and M7100 Series ProSAFE Managed Switches
Command example:
(NETGEAR) #show ipv6 pim rp mapping 192.168.10.1
RP Address 192.168.10.1
Group Address 224.1.2.1
Group Mask 255.255.255.0
Origin Static
Command example:
(NETGEAR) #show ipv6 pim rp mapping
RP Address 192.168.10.1
Group Address 224.1.2.1
Group Mask 255.255.255.0
Origin Static
RP Address 192.168.20.1
Group Address 229.2.0.0
Group Mask 255.255.0.0
Origin Static
Command example:
(NETGEAR) # show ipv6 pim rp mapping candidate
RP Address.................................... 192.168.10.1
Group Address.............................. 224.1.2.1
Group Mask................................. 255.255.0.0
Origin..................................... BSR
C-RP Advertisement Interval (secs)......... 60
Next Candidate RP Advertisement (hh:mm:ss). 00:00:15
Command example:
If no RP Group mapping exist on the router, the following message is displayed:
No RP-Group mappings exist on this router.
Origin
Indicates the mechanism (BSR or static) by which the RP was selected.
C-RP
Advertisement
Interval
Indicates the configured C-RP Advertisement interval with which the router acting as a Candidate
RP will periodically send the C-RP advertisement messages to the elected BSR.
RP will periodically send the C-RP advertisement messages to the elected BSR.
Term
Definition