Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Software Guide
Configure Quality of Service
519
M6100, M5300, and M7100 Series Managed Switches
8.
Use Interface to specify all CoS configurable interfaces.
9.
Use Queue ID to specify all the available queues.
Valid values are 0 to 6. The default is 0.
10.
Use Drop Precedence Level to specify all the available drop precedence levels.
Valid values are 1 to 4. The default is 1.
11.
Use WRED Minimum Threshold to specify the weighted RED minimum queue threshold
below which no packets are dropped for the current drop precedence level.
The range is 0 to 100. The default is 40.
12.
Use WRED Maximum Threshold to specify the weighted RED maximum queue threshold
above which all packets are dropped for the current drop precedence level.
The range is 0 to 100. The default is 100.
13.
Use WRED Drop Probability Scale to determine the packet drop probability for the current
drop precedence level.
The range is 0 to 100. The default is 10.
14.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
The following table describes the nonconfigurable data that is displayed.
Table 198. CoS Interface Queue Drop Precedence Status
Field
Description
Interface
The CoS configurable interface.
Queue ID
The queue ID.