Netgear M5300-28G-POE+ (GSM7228PSv1h2) - 12-Port Managed Gigabit Switch Software Guide

You can select multiple ports and LAGs to apply the same setting to the selected 
interfaces. Select the check box in the heading row to apply a trust mode or rate to all 
interfaces.

Use the Queue ID menu to select the queue to be configured (platform based).

Use Minimum Bandwidth to specify the minimum guaranteed bandwidth allotted to this 

queue. 

Setting this value higher than its corresponding maximum bandwidth automatically 
increases the maximum to the same value. The default value is 0. Valid Range is 0 to 100 
in increments of 1. The value 0 means no guaranteed minimum. Sum of individual 
Minimum Bandwidth values for all queues in the selected interface cannot exceed defined 
maximum (100).

 displays the queue depth management technique used for 

queues on this interface. 

This is used only if the device supports independent settings per queue. From the Queue 
Management Type menu, select either TailDrop or WRED. The default value is TailDrop. 

Click the Apply button.

Your changes are applied to the system. 



Prepare your computer with a static IP address in the 169.254.100.0 subnet, for 

example, 169.254.100.201.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on 

the switch.

Launch a web browser.

Enter the IP address of the switch in the web browser address field.

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The web management interface menu displays.

Select QoS > CoS> Advanced > CoS Queue Drop Precedence Configuration.