Netgear M4300-28G-PoE+ (GSM4328PB) - 24x1G PoE+ Stackable Managed Switch with 2x10GBASE-T and 2xSFP+ (1000W PSU) User Manual
Configure System Information
44
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure a Loopback Interface
You can create, configure, and remove loopback interfaces.
To configure a loopback interface:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select System > Management > Loopback Interface.
6.
Use the Loopback Interface Type list to select IPv4 or IPv6 loopback interface.
7.
In the Loopback ID list, select a list of currently configured loopback interfaces.
8.
In the Primary IP Address field, enter the primary address for this interface in
dotted-decimal notation.
This option is visible when IPv4 loopback is selected.
Table 14. Supported Switch
Field
Description
Switch Model ID
The model number of the supported switch.
Switch Index
The index assigned to the supported switch.
Management Preference
The management preference of the supported switch.