Netgear M4300-28G-PoE+ (GSM4328PB) - 24x1G PoE+ Stackable Managed Switch with 2x10GBASE-T and 2xSFP+ (1000W PSU) User Manual
Configure System Information
46
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
To configure the IPv4 service port:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select System > Management > Management Interfaces > IPv4 Service Port
Configuration
Configuration
.
6.
Select a Service Port Configuration Protocol radio button:
•
BootP
. During the next boot cycle, the BootP client on the device broadcasts a BootP
request in an attempt to acquire information from a BootP server on the network.
•
DHCP
. During the next boot cycle, the DHCP client on the device broadcasts a DHCP
request in an attempt to acquire information from a DHCP server on the network.
•
None
. The device does not attempt to acquire network information dynamically.
•
This specifies how the device acquires network information on the service port.
7.
In the IP Address field, specify the IP address of the interface.
•
If the service port configuration protocol is None, you can manually configure a static
IP address.
IP address.
•
If the service port configuration protocol is BootP or DHCP, this field displays the IP
address that was dynamically acquired (if any).
address that was dynamically acquired (if any).