Netgear M4300-28G-PoE+ (GSM4328PB) - 24x1G PoE+ Stackable Managed Switch with 2x10GBASE-T and 2xSFP+ (1000W PSU) Software Guide

This command removes the private-VLAN association or mapping from the port.

This command configures a port as a promiscuous or host private VLAN port. Note that the 
properties of each mode can be configured even when the switch is not in that mode. 
However, they will only be applicable once the switch is in that particular mode.

This command removes the private-VLAN association or mapping from the port.

host-association

Defines the VLAN association for community or host ports.

mapping

Defines the private VLAN mapping for promiscuous ports.

primary-vlan-id

Primary VLAN ID of a private VLAN.

secondary-vlan-id

Secondary (isolated or community) VLAN ID of a private VLAN.

add

Associates the secondary VLAN with the primary one.

remove

Deletes the secondary VLANs from the primary VLAN association.

secondary-vlan-list

A list of secondary VLANs to be mapped to a primary VLAN.

Format

no switchport private-vlan {host-association | mapping}

Mode

Interface Config

Format

switchport mode private-vlan {host | promiscuous}

Mode

Interface Config

host

Configures an interface as a private VLAN host port. It can be either isolated or community port 
depending on the secondary VLAN it is associated with.

promiscuous

Configures an interface as a private VLAN promiscuous port. The promiscuous ports are members 
of the primary VLAN.

Format

no switchport mode private-vlan

Mode

Interface Config