Netgear FS752TPS – ProSAFE 48 Port 10/100 Stackable Smart Switch with 4 Gigabit Ports and 24 Port PoE Installation Guide

Page of 190
FS700TS Smart Switch Software Administration Manual
Introduction to the Web Browser Interface
2-3
v1.0, September 2007
For further description of the functions, refer to the appropriate section of this manual:
 describes how to configure the System functions.
 describes how to configure the Switch functions.
 describes how to configure QoS functions.
 describes how to configure security.
 describes how to configure monitoring functions.
 describes maintenance functions, such as firmware upgrade.
 describes how to obtain online help and support.
Using the NETGEAR Web Management System Options
The FS700TS web browser interface provides the following options: 
Device Management Buttons  Provides an explanation of the management buttons in the 
NETGEAR FS700TS Smart Switch.
Informational Services – Provides access to informational services including technical 
support, online help and device information.
Using Screen and Table Options – Provides an explanation of specific GUI characteristics 
and tables for configuring the device.
Device Management Buttons
The NETGEAR FS700TS Smart Switch web browser GUI management buttons allow network 
managers to easily configure the device from remote locations. The management buttons are 
shown below: 
Table 1:
Device Management Buttons
Button Name
Description
ADD
Adds information to tables or information windows.
APPLY
Applies configured changes to the device.
CANCEL
Cancels modifications to tables or information windows.
CLEAR ALL
Refreshes device information.
CLEAR ALL COUNTERS
Resets statistics counters.
CLEAR LOGS
Clears logs.