Netgear M4100-D12G-POE+ (GSM5212P) - ProSAFE Gigabit L2+ Managed Switch Software Guide

This command restores the default for each queue's minimum bandwidth value.

Global Config

Interface Config

This command activates the strict priority scheduler mode for each specified queue. 

Global Config

Interface Config

This command restores the default weighted scheduler mode for each specified queue.

Global Config

Interface Config

This command activates weighted random early discard (WRED) for each specified queue 
on the interface. Specific WRED parameters are configured using the random-detect 
queue-parms and the random-detect exponential-weighting-constant commands. When 
specified in Interface Config mode, this command affects a single interface only, whereas in 
Global Config mode, it applies to all interfaces. At least one, but no more than n, queue-id 
values are specified with this command.

Duplicate queue-id values are ignored. Each queue-id value ranges from 0 to (n-1), where n 
is the total number of queues supported per interface. The number n is platform dependant 
and corresponds to the number of supported queues (traffic classes).

Global Config

Interface Config

Format

no cos-queue min-bandwidth

Modes

Format

cos-queue strict <queue-id-1> [<queue-id-2> … <queue-id-n>]

Modes

Format

no cos-queue strict <queue-id-1> [<queue-id-2> … <queue-id-n>]

Modes

Format

cos-queue random-detect <queue-id-1> [<queue-id-2> … <queue-id-n>]

Modes