Netgear M4100-D12G-POE+ (GSM5212P) - ProSAFE Gigabit L2+ Managed Switch User Manual

This field cannot be set if a redirect interface is already configured for the ACL rule. This 
field is visible for a Permit action. 

Use Redirect Interface to specify the specific egress interface where the matching traffic 
stream is forced, bypassing any forwarding decision normally performed by the device.

This field cannot be set if a mirror interface is already configured for the ACL rule. 

Use Match Every to specify an indication to match every Layer 2 MAC packet. 

The valid values are as follows:

True. Every packet must match the selected ACL rule. 

False. It is not mandatory for every packet to match the selected ACL rule. 

Use CoS to specify the 802.1p user priority to compare against an Ethernet frame.

The valid range of values is 0 to 7.

Use Destination MAC to specify the destination MAC address to compare against an 
Ethernet frame. 

The valid format is xx:xx:xx:xx:xx:xx. The BPDU keyword can be specified using a 
Destination MAC address of 01:80:C2:xx:xx:xx. 

Use Destination MAC Mask to specify the destination MAC address mask specifying which 
bits in the destination MAC to compare against an Ethernet frame. 

The valid format is xx:xx:xx:xx:xx:xx. The BPDU keyword can be specified using a 
destination MAC mask of 00:00:00:ff:ff:ff. 

Use EtherType Key to specify the EtherType value to compare against an Ethernet frame. 

The valid values are the following:

Appletalk 

ARP 

IBM SNA 

IPv4 

IPv6 

IPX 

MPLS multicast 

MPLS unicast 

NetBIOS 

Novell 

PPPoE 

Reverse ARP 

User Value 

Use EtherType User Value to specify the user-defined customized EtherType value to be 
used when the user has selected User Value as the EtherType key, to compare against an 
Ethernet frame.