Netgear M4100-D12G-POE+ (GSM5212P) - ProSAFE Gigabit L2+ Managed Switch User Manual

The default IP address of the switch is 169.254.100.100. 

The Login screen displays.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The web management interface menu displays.

Select Security 





 MAC Binding Configuration.

Select an existing MAC ACL from the ACL ID menu. 

You can select one and bind it to the interfaces you want. The packet filtering direction for 

ACL is Inbound, which means the MAC ACL rules are applied to traffic entering the port.

Specify an optional sequence number to indicate the order of this access list relative to other 
access lists already assigned to this interface and direction. 

A low number indicates high precedence order. If a sequence number is already in use 

for this interface and direction, the specified access list replaces the currently attached 
access list using that sequence number. If you do not specify the sequence number, a 
sequence number that is one greater than the highest sequence number currently in use 
for this interface and direction is used. The valid range is 1–4294967295.

Click the appropriate orange bar to expose the available ports or LAGs. 

The Port Selection Table provides a list of all available valid interfaces for ACL binding. All 
nonrouting physical interfaces, VLAN interface, and interfaces participating in LAGs are 
listed.

To add the selected ACL to a port or LAG, click the box directly below the port or LAG 
number so that an X appears in the box.

To remove the selected ACL from a port or LAG, click the box directly below the port 
or LAG number to clear the selection. An X in the box indicates that the ACL is 
applied to the interface.