KitchenAid Slow Cook Warming Drawer Architect® Series II Requires Custom Panel and Handle Data Sheet

Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here.

■

Phillips screwdriver

■

Drill and appropriate bits

■

6 - #8–18 x 

¹⁄₂ screws

■

Indicator light lens

■

Custom drawer front

■

Custom handle (optional)

■

Adhesive recommended for plastic to wood

The warming drawer has an interface that will allow a modest 
range of panel sizes. The actual panel size should be selected by 
the customer and their contractor to suit the desired effect. It is 
recommended that a qualified carpenter make and install the 
custom drawer front and handle(s) to match surrounding 
cabinetry.

1. Install warming drawer unit as instructed by the installation 

instructions provided with the warming drawer.

2. Create the custom drawer front. Below are the minimum and 

maximum dimensions for the custom drawer front. The size 
of the custom drawer front for the warming drawer will vary 
according to the specific installation. The depth of the panel 
will vary in order to have the custom warming drawer flush 
with the surrounding cabinets.

3. It is recommended that if a wood or porous custom drawer 

front is installed, a high quality spar polyurethane finish be 
applied to the inner wood surface.

4. For the lens, drill a 

⁵⁄₁₆" (7.9 mm) diameter hole through the 

appearance side of the custom drawer front. This hole will 
allow the indicator “ON” light to be visible through the custom 
drawer front. To secure the lens, use an adhesive specified for 
plastic to wood application.

5. Install custom handle (not supplied) through custom drawer 

front.

6. The custom drawer front is fastened to the stainless steel 

drawer by driving 6 screws through clearance holes in the 
drawer front into the wooden or other custom made panel.

24" (60.96 cm) 
Warming Drawer

23

³⁄₄" 

(60.3 cm)

10

⁵⁄₁₆" 

(26.2 cm)

23"
(58.4 cm)

9

¹⁄₁₆" 

(23.0 cm)

27" (68.58 cm) 
Warming Drawer

26

³⁄₄" 

(67.9 cm)

10

⁵⁄₁₆" 

(26.2 cm)

26"
(66.1cm)

9

¹⁄₁₆" 

(23.0 cm)

30" (76.2 cm) 
Warming Drawer

29

³⁄₄" 

(75.6 cm)

10

⁵⁄₁₆" 

(26.2 cm)

29"
(73.7cm)

9

¹⁄₁₆" 

(23.0 cm)

A

B

A

D

D

C

B

E