Xerox Xerox® 4110 Copier User Guide

Xerox 4590/4110 Copier/Printer User Guide

2-95

2. Copy

Delete inside

Deletes the selected areas and copies them.

Area Settings

Displays the

Delete Outside/Delete Inside - Area X

screen. The

maximum number of areas you can select is 3.

NOTE: X displays an area number.

Original with target areas

You can specify side 1, side 2 or both sides as extract or delete

areas in 2-sided copies.

•

Both Sides
Targets both sides. Scanned reversely.

•

Side 1 Only
Targets side 1.

•

Side 2 Only
Targets side 2.

Delete Outside/Delete Inside - Area X screen

This feature allows you to specify the areas for extracting or

deleting. The quadrangle with a diagonal line and four straight

sides connecting the coordinates, X1/Y1 and X2/Y2 is the deleted

or extracted area. By making the top right corner of a document

into the starting point, the X-axis is set as the direction of width,

and the Y-axis is set as the direction of length.
You can specify a value of 0 - 17.0 inches (0 to 432 mm) for the

width (X) and the length (Y), in 0.1 inch (1 mm) increments.

NOTE: Specify the 2 coordinates from the top right corner of the
document.

When specifying multiple areas, it is also possible to
overlap and specify an area.

When selecting Reduce/Enlarge, areas are reduced or
enlarged by interlocking magnification.