Zanussi ZBF22451SA User Manual
To select a different set temperature refer to
"Temperature regulation".
"Temperature regulation".
Switching off
To switch off the appliance do these steps:
1.
Press the ON/OFF button for 5 seconds.
2.
The display switches off.
3.
To disconnect the appliance from the
power disconnect the mains plug from the
power socket.
power disconnect the mains plug from the
power socket.
Temperature regulation
The set temperature of the freezer may be ad-
justed by pressing the temperature button.
Set default temperature:
justed by pressing the temperature button.
Set default temperature:
• -18°C for the freezer
The temperature indicator shows the set tem-
perature.
The set temperature will be reached within 24
hours.
The temperature indicator shows the set tem-
perature.
The set temperature will be reached within 24
hours.
Important! After a power failure the set
temperature remains stored.
temperature remains stored.
Child Lock function
To lock the buttons from unintentional opera-
tion select the Child Lock function.
To switch on the function:
tion select the Child Lock function.
To switch on the function:
1.
Press the Mode button until the corre-
sponding icon appears.
sponding icon appears.
2.
The Child Lock indicator flashes.
3.
Press the OK button to confirm.
The Child Lock indicator is shown.
The Child Lock indicator is shown.
To switch off the function:
1.
Press the Mode button until the Child
Lock indicator flashes.
Lock indicator flashes.
2.
Press the OK button to confirm.
3.
The Child Lock indicator goes off.
Fast Freeze function
To switch on the function:
1.
Press the Mode button until the corre-
sponding icon appears.
The Fast Freeze indicator flashes.
sponding icon appears.
The Fast Freeze indicator flashes.
2.
Press the OK button to confirm.
The Fast Freeze indicator is shown.
The Fast Freeze indicator is shown.
This function stops automatically after 52
hours.
To switch off the function before its automatic
end:
hours.
To switch off the function before its automatic
end:
1.
Press the Mode button until the Fast
Freeze indicator flashes.
Freeze indicator flashes.
2.
Press the OK button to confirm.
3.
The Fast Freeze indicator goes off.
Important! The function switches off by se-
lecting a different freezer set temperature.
lecting a different freezer set temperature.
High temperature alarm
An increase in the temperature in the freezer
compartment (for example due to an earlier
power failure) is indicated by:
compartment (for example due to an earlier
power failure) is indicated by:
• flashing the alarm and freezer temperature
indicators
• sounding of buzzer.
To reset the alarm:
To reset the alarm:
1.
Press any button.
2.
The buzzer switches off.
3.
The freezer temperature indicator shows
the highest temperature reached for a few
seconds. Then shows again the set tem-
perature.
the highest temperature reached for a few
seconds. Then shows again the set tem-
perature.
4.
The alarm indicator continue to flash until
the normal conditions are restored.
the normal conditions are restored.
When the alarm has returned the alarm indica-
tor goes off.
tor goes off.
Door open alarm
An acoustic alarm will sound if the door is left
open for a few minutes. The door open alarm
conditions are indicated by:
open for a few minutes. The door open alarm
conditions are indicated by:
• flashing Alarm indicator
• acoustic buzzer
When normal conditions are restored (door
closed), the alarm will stop.
During the alarm, the buzzer can be switched
off by pressing any button.
When normal conditions are restored (door
closed), the alarm will stop.
During the alarm, the buzzer can be switched
off by pressing any button.
5
www.zanussi.com